<p id="ht1d1"><mark id="ht1d1"></mark></p>

Products

X5105 HF Transceiver

Model:X5105

Speciality:Portable

Field of application: HF/50MHz Transceiver

Recommend
  • Description
  • Parameter

X5105 is a complete "grab and go" station in a ruggedly-stylish compact enclosure.

Go ahead, pick it up! Fits comfortably in your hand, yet it delivers all the powerhouse features normally reserved for a full-sized HF transceiver.

Going on a trip? Leave the accessory bag at home -- everything you need is already built in. Just toss up an antenna and you're on the air!

Here are some of the X5105's advanced features:

? Large back-lit multi-function LCD display screen

? Transmit on all bands, 160 through 6 meters including 5 MHz

? Receive with gap-free coverage from 500 kHz to 54 MHz

? Operate on all modes (USB, LSB, CW, AM, FM, and Digital)

? Selectable IF bandwidth (500-Hz CW, 2.4-kHz SSB, 6-kHz AM)

? Built-in DSP, noise blanker, and notch filter to suppress interference

? Robust 600-mW AF-output with high-pass and low-pass audio EQ

? Deluxe multi-function keypad-microphone included

? Low-profile controls, heat sink, and desktop stand all built in

? Powerful 3800-mAh battery for extended "off-the-grid" operation

? More antenna choices using the built-in auto-tuner (ATU)

? Scan-feature displays band activity and plots antenna SWR

? Built-in Data Modem with CAR and AFC tracking, onscreen display

? Built-in auto-keyer with three memory channels plus CW trainer

? Adjustable SSB with speech-processing compressor

? Regular firmware updates are free, on line, any time

? Compact: 6-5/8Wx3-5/8Hx1-7/8D”, weighs 2.1 pounds with battery X5105 comes with features other manufacturers miss, like back-lit lowprofile control switches      conveniently spaced for adult-sized fingers, and a highly-visible 3.6-inch back-lit LCD that

displays all aspects of it's operation. 

Even the VFO is different, with a unique counter-sunk tuning knob and an unusually wide range of tuning rates (you even get velvet-smooth 1-Hz stepping to lock in data signals). 

DX splits are easy to set up, and the wide-range RIT has a precision digital readout for surveying adjacent channels.

Transmit power is adjustable from 0.5 to 5.0 Watts in calibrated half-Watt increments, perfect for operating QRP, running miles-per-watt tests, or setting the correct drive level for an external amplifier.

You even get a built-in data modem with both CAR (carrier) and AFC (frequency) tracking -- plus an onscreen spectrum display. And, when on the road, you can leave your antenna analyzer home because the X5105 plots SWR graphically. Add the wide-range impedance-matching capability of the built-in ATU, and the X5105 can put you on the map from virtually any location.

When receive conditions get rough,the X5105 comes with a powerful toolbox for cutting interference and pulling stations in. There's a sensitive pre-amp to boost weak signals, a front-end attenuator to reduce overload, noise blanking (NB) for impulse noise, digital noise reduction (DNR) for atmospheric noise, variable notch filtering (NF) for pesky heterodynes, adjustable AGCRate (AGC), built-in CW filter, plus variable high-pass and low-pass audio-EQ filtering. And lots of spare audio-output power for driving an external speaker.

In transmit, CW contesting is a breeze! Get variable-speed automatic keying, plus three programmable message channels. For SSB contesting, theadjustable speech processor scores extra points. Deluxe electret keypad microphone places the radio's advanced features at your fingertips. A mic is also built-into for walkie-talkie operation.

Power the X5105 from any regulated 9-15 volt 3-amp DC source or go "off grid" for up to 8 hours using the powerful built-in 3800-mAh Lithium-ion battery pack. Charging is simple because the radio's power-management circuitry continuously monitors battery condition and fully controls the recharge cycle.

Factory tested, complies with FCC rules, and has one year warranty.


General parameters

Frequency   range:

receive:

0.5MHz30MHz



50MHz54MHz


transmit:

160m6m Amateur   radio band only

Transmit   mode:

A1A(CW),A3E(AM), J3E(USB/LSB), F3E(FM)

Minimum   stepping:

1Hz

Antenna   impedance:

50Ω

Working   temperature range:

-10  +50

Frequency   stability:

160minutes after   boot is ±4ppm


@25℃: 1ppm/   hour

Supply   voltage :

Normal: 13.8VDC±15%,Negative grounding


operation: 9.015.0VDC,Negative   grounding

Current   consumption :

receive: 600mA@ Max


launch: 2.5A@ Max

Battery   capacity :

3800mAh @12V

Fuselage   size:

168*93*47mmWxHxT (excluding   protrusions)

Weight:

About 0.94kg (host only)



Transmitter   parameters


RF   output power:

5W(SSB/CW/FM)1.5W(AM signal   carrier)  @13.8VDC

Modulation   type:

SSB: balanced modulation


AM: Low level amplitude modulation


FM: Variable reactance frequency   modulation

FM maximum frequency offset:

±5kHz

Stray radiation :

-55dB

Carrier suppression :

40dB

Sideband stray:

50dB

SSB frequency response:

400Hz-2800Hz-6dB

Microphone impedance:

20010kroutine   600Ω

Receiver parameters


Circuit type:

Secondary frequency conversion   superheterodyne +audio frequency DSP

IF-FRE:

First IF:70.455MHz


Second IF:10.695MHz


Third IF:455kHzNFM

Sensitivity:

158.png
(PRE=on, ATT=off, NB=off, NR=off, SSB/CW/AM = 10dB S/N, FM = 12dB SINAD)

Mirror suppression degree :

70dB

IF Inhibition degree :

60dB

selectivity:

SSB:  -6dB:2.4kHz/-60dB:4.6kHz


CW:   -6dB:500Hz/-60dB:2000Hz


AM:  -6dB:6.0kHz/-60dB:25.0kHz


FM:   -6dB:12.0kHz/-60dB:25.0kHz

 

Audio output: 0.6W 8Ω,≤10% THD

Audio output impedance:  416Ω

 

u   The above specifications may be adjusted without notice.

u   The frequency range of transceiver will vary according to the machine version.  Please consult the dealer for details.



彩吧vip